RAXIT CORNERGUARD *SET OF TWO*


The RAXIT CORNERGUARD is a stainless steel corner fitting that closes the weakest point of a door seal: the bottom corner by the door frame.

How it works:

CornerGuard is screwed to the door frame, and its outer edge stands 4 mm off the door. The door keeps its standard bottom lip. The Raxit seal is fitted over the lip, and its end slides in under the CornerGuard.

Step 1: screw the Raxit CornerGuard to the frame of a sectional door with its standard bottom lip

1. Screw it to the frame
Use the 2 screws supplied.

Step 2: fit the Raxit seal over the standard bottom lip and slide its end under the offset edge of the CornerGuard

2. Fit the seal
Fit it over the bottom lip and slide the end in under the offset edge.

Step 3: the door corner is closed with the CornerGuard and the Raxit seal in place

3. The corner is closed
The corner is now covered in stainless steel.

Key Features:

  • Protects the corner: Corners are where rodents most often attack.
  • Keeps the seal clear: On sectional doors the seal is kept clear of the side seal, so it is not twisted out of place when the door runs up and down.
  • Fits either side: One part for the left and right side of the door. Simply turn it upside down.
  • Works with all Raxit seals: Fits every Raxit seal solution.

Specifications:

  • Material: Stainless steel AISI 304, 1.5 mm
  • Height: 80.5 mm
  • Flanges: 70 mm (fixing side) and 45 mm (seal side)
  • Offset: 4 mm for the seal
  • Fixing: 2 x Ø6 mm holes
  • Weight: approx. 110 g per piece
  • Supplied as: set of two, one for each side of the door, screws included